VALIDATED USUABLE SPACE:
NUMBER OF PROVIDED TRAYS:
2 (Standard + 1 HTS)
DIMENSIONS (W x D x H):
710 x 825 x 970 mm
Cat. No.: 62000 | 62005
Cat. No.: 62001 | 62006
Hettich offers an alternative operating mode in its cooled incubators for special applications where low temperatures below 15°C are required over long periods. This ensures high temperature homogeneity and temperature stability. At the same time, the unit's compressor is better protected, which contributes to a longer service life of the unit and a reduction in energy consumption. Temperatures between +1°C and +5°C usually lead to icing of the cooling unit during continuous operation. If the cooling unit is briefly warmed up once a day, ice formation is reliably prevented. For this purpose, a DeFrost program can easily be created by the user with the help of the touch screen.
1. Unit cools down to the individual temperature of the customer: in this example first segment to +1°C
2. The cooling unit is briefly heated up: in this example second segment to +10°C for the duration of 1 minute
3. The device remains in stand-by mode: in this example third segment for 3 minutes
4. The unit cools down to an intermediate temperature, this must be 2°C above the set temperature: in this example fourth segment 3°C for Duration of 1 minute
Cat. No.: 60526
The Hettich Telescop System, which fits in all three incubator sizes, allows the internal space of the HettCube to be used optimally. Telescopic rails make it easy to work and permit use of the entire surface area. Even samples that are way in the back can be easily reached.
The trays, drawers, holders and rails are separate components. You just hang the rails in the grids of the holders and put in the tray or drawer of your choice.
Tray pulls out up to 70 %.
Cat. No.: 60031 (Standard tray)
Differents sets are available.
The new Petri dish rack allows large numbers of cultures to be processed quickly and economically. The rack has been specially developed to make the handling of Petri dishes easier. Made of stainless steel, autoclavable.
Advantages for the user in:
90 Petri dishes per rack (Ø 90 mm)
2 racks per pair of rails = 180 dishes
360 Petri dishes
900 Petri dishes
1800 Petri dishes
Cat. No.: 60040 (Rack for Petri dishes, also with HTS available)
Process large sample quantities conveniently and economically.
With an inclination angle of 5°, the slide-in units are ideally suited for the Loewenstein method. The drawers are made of high-quality stainless steel and are autoclavable.
Your advantages at a glance:
Optimum use of space:
81 tubes (diameter 15 - 20 mm, length 160 mm) per insert
|HettCube 200||HettCube 400||HettCube 600|
|6 Einschübe = 486||16 Einschübe = 1296 Röhrchen||18 Einschübe = 1782 Röhrchen|
Cat. no.: 60041 (also available with HTS)
These flexible racks simplify handling, save time and enable the use of 16 tubes for different slant angles with 5° or 20°. The slant angle of the tubes can be very easily changed without the need for tools.
To use for:
Made of stainless steel, autoclavable.
Frame L: 60027
Frame XL: 60028
Passive Dehumidification has been developed to reduce humidity quickly and specifically and to avoid condensation inside the incubator. The integrated ventilation opening on the incubator rear wall can be opened or closed manually or time-controlled via the touch control panel. For best results, the ambient temperature should be at least 5°C below the incubator's target temperature when using this option. At the same time, a higher relative humidity in the interior compared to the incubator environment creates optimal conditions.
Cat. No.: 60042
No additional inner door!
The glass door enables users to check on their cultures without opening the door. The well-conceived air-guiding system makes this possible.
HettCube 200: 60013
HettCube 400: 60029
HettCube 600: 60030
On the back of the device Hettich is offering as additional option a 4-place socket strip, which is controllable as a unit via display.
Cat. No.: 60521
Incubators can be ordered directly from the factory with this service with a left-hinged door.
Cat. No.: 60044
All rolling cabinets are of study design and feature castors and two locks. Ideal to create storing space beneath a HettCube 200.
Incubators can be assembled with a pre-installed stacking kit direct from the factory.
Cat. No.: 60043